Grablink DualBase

Frame grabber for two base-configuration Camera Link cameras

Device Features

• For two Camera Link Base or Lite configuration cameras
• Directly compatible with hundreds of Camera Link cameras available on the market
• Supports PoCL, Power over Camera Link
• ECCO: Extended Camera Link cable length
• PCIe x4 bus: 850 MB/s sustained delivery bandwidth
• Feature-rich set of 20 digital IO lines
• Memento Event Logging Tool

• Format : Standard profile, half length, 4-lane PCI Express card
• Cooling method : Air-cooling, fanless
• Mounting : For insertion in a standard height, 4-lane or higher, PCI Express card slot
• Connectors –
• ‘A’ on bracket:
  • 26-position Shrunk Delta Ribbon (SDR) socket
  • Camera Link Camera A
• ‘B’ on bracket:
  • 26-position Shrunk Delta Ribbon (SDR) socket
  • Camera Link Camera B
• ‘EXTERNAL I/O’ on bracket:
  • 26-pin 3-row high-density female sub-D connector
  • I/O lines and power output
• ‘INTERNAL I/O A on PCB:
  • 26-pin 2-row 0.1″ pitch pin header with shrouding
  • I/O lines of camera A and power output
• ‘INTERNAL I/O B on PCB:
  • 26-pin 2-row 0.1″ pitch pin header with shrouding
  • I/O lines of camera B and power output
• ‘POWER INPUT’ on module:
  • 4-pin MOLEX power socket
  • 12 VDC power input for PoCL cameras and I/O power
• Dimensions : PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
• Standard : PCI Express 1.0
• Link width : 4 lanes
• Link speed : 2.5 GT/s (PCIe 1.0)
• Maximum payload size : 1024 bytes
• DMA : 32- and 64-bit
• Peak delivery bandwidth : 1,024 MB/s
• Power consumption : Max.7.2 W; Typ. 6.0 W (0.47 A @ 3.3V;0.37 A @+12V)